UV Guard HWC-1 Hard Water Conditioner Small House or Granny Flat (18 lpm)

$560.00

Does your home have a hard water problem?

Water hardness is most commonly caused by dissolved Calcium and Magnesium minerals. You may have a hard water problem in your home water supply if you notice any of the following signs:

Drinking water tasting or smelling funny
Scaling on all water outlets
Spots on dishwasher cleaned glassware and dishes
Dry skin, irritation and dandruff after bathing or showering
Soap scum in the bathroom and kitchen

Sound familiar? If so, the HWC could be the answer.

The HWC-1 has the following features:

Ideal for small homes with 1-2 occupants or granny flats
Whole house average flow rate 18 LPM
3/4″ Female BSP connections
Maintenance and power free – no operational costs
Easy DIY instillation – simply install on the incoming pipe to your property
Lifetime warranty*
Constructed from 316 stainless steel
Australian Made
Australian WaterMark certified

*Lifetime Warranty to the original purchaser for its useful life against deficiencies in material and workmanship

1. Hard water enters the HWC

2. water is exposed to the internal surface of the HWC. the integral hydraulic design combined with the chemically-specific material of the conditioner activates an electro-chemical reaction

3. The minerals within the hard water begin to lose their scale producing properties due to changes in their molecular arrangement

4. Hard minerals are changed from large molecules to inactive microscopic particles which flow freely, unable to stick to surfaces causing scaling

Installed within the pipework – small footprint, no tanks required

24/7 operation- no back-washing or resin regeneration to interrupt treatment process

No added salt (sodium chloride) or other chemical (potassium choride)-No heath concerns or environmental damage due to the high salt water content (brine)

Nothing is removed from the water. Vital minerals for human health are maintained unlike RO systems

Multiple models to suit specific hard water conditioning needs and existing pipe work size

DIY install

1. The HWC should be installed anywhere between the water tank and home. Or, if on mains water, it is convenient to install between the water meter and home. The HWC can be installed underground or exposed to the weather.

2. Establish the size of your pipework and purchase the required fittings to allow the female BSP connections of the HWC to be connected.

3. Measure the length of your HWC and cut the corresponding pipe section.

4. Install the required fittings and connect the HWC. It does not matter which way the HWC is installed.

Reviews

There are no reviews yet

Be the first to review “UV Guard HWC-1 Hard Water Conditioner Small House or Granny Flat (18 lpm)”